Pages

August 4, 2012

Pallet Style Shoe Rack {Tutorial}



When you live in a small house (and let's face it - what New England house isn't small?) you learn to utilize every available space :)
My husband loves his shoes - and because we have one tiny closet in our bedroom, he uses the closet in the kid's room.  So, his oft worn shoes are oft found lying around the bedroom floor - and my pregnant belly does not allow me to see them and so I end up tripping over them! :) 

Enter this handy, minimal space taking shoe rack!  We had this 16" of space beside the dresser and the heating coil, and it was enough!

I ravaged the scrap wood pile at the hardware store, and bought all the wood I needed for just a couple of dollars.  This would be a great project for any kind of scrap wood - so you can make one very inexpensively. 

I started by making something that looked a lot like a ladder.
The width of my space allowed for a 16" wide shoe rack, so each of my cross pieces is 16" wide.
My dresser is a little over 3' tall, so I made the rack approximately that height so that it would be hidden by the dresser. 

To calculate the exact height, I took the width of each cross piece (2.5" for me), plus the width of the gap (3" was a perfect gap to fit the shoes in), and added them together.  I did that until it added up to about the height I wanted.  (This was easier to do visually, on a piece of paper, so that I could see how many boards and gaps I would need to reach the approximate height I wanted). 



I used wood glue and nails to secure each cross piece at the correct position, onto boards cut to the correct height.  As I said, I left a 3" gap in between each board, which was just right for the toe of the shoes to fit into. 

I did the very top and very bottom "rungs" last, because I needed to add an additional piece:
a small piece of 2x4.  I added a piece of 2x4 to the back of all 4 corners, and used longer nails to go through all the boards.  This 2x4 piece allowed me more surface area to secure the perpendicular boards too...
Now do as I say, and not as I do - - make all these boards flush at the top and bottom if you can.  It makes it easier.  It was not as important for me to have things flush at the top, but it is important to have them flush for the bottom part of the "ladder". 

The top might be a bit of overkill :)  This is the part that leans against the wall.  I made it extend out by 6", which is the width of my bottom board.  (see pictures of the bottom board below). 

Here you can see how it leans against the wall.  These are just additional pieces of 2.5" wide boards, glued and nailed perpendicular to the "ladder", with 2x4s in between.  You have to do some calculating to make sure that they are the correct length.

I ended up setting a board on top - as you see below.  It is the same size as the board I use at the bottom of the shoe rack.  I think it looks nicer, and it makes a little shelf to set things on. 

Here is the bottom of the "ladder":  To the bottom I nailed and glued a larger 6" board (also 16" wide, the same width as the rest of the shoe rack). 
 Here it is from the inside (or back) of the shoe rack. 

This board allowed me to rest a brick on it - to keep the shoe rack from toppling over.  You can't really see it, especially when the shoes are all stacked, so it doesn't need to be really pretty. 
I certainly didnt want to secure the shoe rack to the wall, but I needed it anchored somehow.  Now, even if there are only shoes in the top of the rack, or heavier shoes in the top, there isn't a risk of it tipping over. 

Here is the finished product, set against the wall.  Not bad!  I love building things!! (Especially when they turn out!!)

I will probably add felt to the bottom of the cross pieces of wood, so that the wood doesn't scrape up the shoes.  Just a little strip secured with hot glue should do the trick.  Same with the part of the wood that touches the wall.  I did sand all the edges of the wood, but it is still better to be safe than sorry you have scratches all over.

And here it is all filled with shoes!
When my husband got home from work, he walked in and noticed it right away (it was a surprise), and said, "Well, aren't you a clever girl." 
Why thank you :)

image signature

25 comments:

  1. Oh wow! Thia has me wanting to run grab a pallet out of the old barn right now. Cute Idea.

    ReplyDelete
  2. love this idea! thank you for the tutorial!

    ReplyDelete
  3. A great idea for a small space - my husband is always leaving his shoes by our front door and I trip over them too. Thanks for sharing!

    ReplyDelete
  4. Stopping by from the blog hop. New follower your welcome to visit anytime. http://www.southernmadeintheshade.blogspot.com I like your shoe rack project all age children could reach it.

    ReplyDelete
  5. Such an extraordinary blog and every one of the compositions. Can't resist considering the creator.
    best-wood-shoe-racks

    ReplyDelete
  6. Superb work you well done on this blog, I am deeply read your blog I got of many information on this, keep sharing like this type of blog, I hope you will be create soon this type of blog and valuable information, I am waiting for your new blog, I hope I will be see you soon, thank you so much for read my comment, I am suggest to you all comment reader please read this blog he will be mention lot of information on this please go and read it, If any one searching dynamic website designing company in Delhi in cheap rate please go on my website, we are do for you any think.
    Dynamic Website Designing Company in Delhi

    ReplyDelete
  7. I like to read your article, I got a many useful information on this blog, I think you will be share with us like this type of article, keep share more like this type of topic am happy to see your blog post, thank you so much for share this useful information with us, If any one grow up looks and life style please come on my website.
    Lifestyle Magazine

    ReplyDelete
  8. One of my best buddies recommended this website and I owe it to her. She helped me to find this nice website. I appreciate your nice work. Keep continuing helping others. I will refer this site to other people like my best buddy. Thanks.
    Hug & blesses!
    Click this post to read more.

    ReplyDelete
  9. The article is very interesting and very understood to be read, may be useful for the people.if you are looking for gift package,welcome visit ! https://tjproducts.com.sg/

    ReplyDelete
  10. Thanks for the post. It was very interesting and meaningful. I really appreciate it! Keep updating stuffs like this. this is my website ,welcome visit it https://www.slew-bearing.com/SLEW-DRIVE-pl550823.html

    ReplyDelete
  11. Thanks for the post. It was very interesting and meaningful. I really appreciate it! Keep updating stuffs like this. this is my website ,welcome visit it:https://www.tbtscietech.com/Falling-weight-deflectometer-pl3404345.html

    ReplyDelete
  12. Your blog provided us with valuable information to work with. Click Here

    ReplyDelete
  13. thanks for wonderful information about Pallet Style, keep posting Java Classes In Pune

    ReplyDelete
  14. Jet Brains developed the statically typed, all-purpose programming language known as Kotlin. It combines elements of functional and object-oriented programming. They are compatible as Kotlin and Java can communicate and use each other's data. Like the Java compiler, the Kotlin compiler creates byte code compatible with the JVM. To know more about kotlin, join Kotlin Training in Chennai at FITA Academy.
    Kotlin Training in Chennai

    ReplyDelete
  15. This comment has been removed by the author.

    ReplyDelete
  16. Cybersecurity education is pivotal in defending against cyber threats in today's digital landscape. By fostering an understanding of cyber threats and their implications, it empowers individuals to safeguard their digital presence and contribute to a secure online environment. As technology advances, the importance of cybersecurity education will only grow, solidifying its place as a crucial component of modern education. To learn more about Cybersecurity, Join StrongBox Academy Cybersecurity Training Academy
    StrongBox Academy

    ReplyDelete